This rugged Navy Galaxy-Series UPS System is specifically designed for submarine and shipboard applications in compliance to MIL-STD-1399, MIL-STD-461, MIL-STD-901, MIL-STD-167, MIL-STD-810, AND MIL-STD-740. The example pictured is a compact 2.5 KVA unit built for use on the US Virginia Class Submarine, as well as other high profile shipboard and submarine applications in US and US-friendly fleets worldwide. This model has a three-phase power factor corrected (PFC) input of 115 VAC L-L, 50/60 Hz per MIL-STD-1399 Section 300 Type I and a pure sinewave galvanically isolated output of 115 VAC, Single-Phase. Single-phase input is optional, and output frequency is available in 50, 60, or 400 Hz (specify.) This UPS System contains all of the features standard on other Galaxy-Series units, as well as additional features that make it ideal for Naval applications.

RUGGED TRUE ON-LINE UPS
NAVY GALAXY SERIES
Model Selection

MODEL	KVA	INPUT	OUTPUT	UPS LBS.	RUN TIME
NGRS11-1.5K60-115-115	1.5	115VAC	115 VAC	115	10 min
NGRS11-1.5K60-115(D)-115	1.5	115VAC L-L	115VAC	115	10 min
NGRS11-2.5K60-115-115	2.5	115VAC	115VAC	125	10 min
NGRS11-2.5K60-115(D)-115	2.5	115VAC L-L	115VAC	125	10 min

• Single Phase Input • RS 232 Interface • RUPS 2000 Computer Interface • Chassis Slides • MS Connectors Mates • High Speed Mechanical Transfer Switch • Custom Paint & Markings

ELECTRICAL Optional Input Voltages available (select): 115, 120, 208, 220, 230, 240 VAC. 1Ø 115/200, 120/208, 220/380 3Ø Optional Input Frequencies available (specify): 50, 60 or 400 Hz Optional Output Voltages Available (specify): 115, 120, 208, 220, 230, 240 VAC 1Ø Output Frequency (specify): 50, 60 or 400Hz Voltage Regulation: +/- 2% NL to FL Frequency Regulation: 0.1% Harmonic Distortion: 2% THD Typical 5% Max Input Power Factor: 0.99 Efficency at full load: 82% typical Overload: 125% for 5 minutes INTERNAL BATTERIES Premium 10 year life wide temp batteries which are sealed, maintenance free, and user replaceable. PROTECTIVE FEATURES AC & DC Input Circuit Breakes, Low Battery Shut Off, Overload and Thermal Protection, Audible Alarm with Silence Switch, and EPO. ENVIRONMENTAL Operating Temperature: 0° to +50° C per MIL-STD-810D Storage Temperature Range: -30° to +60° C Humidity: to 95% non-condensing Elevation: 15,000 Ft. (4.572m) operating Audible noise: Less than 55 dBA at 5 ft. (1.5 m) Cooling: Forced air (exhaust at rear) Airflow 200 CFM Maximum EMI: Per MIL-STD-461B/E Vibration: Per MIL-STD-167-1 Shock: 20g for 20ms half sinewave per MIL-STD-901C Grade A Structureborne Noise: MIL-STD-740B Grade A ALARMS AND DIAGNOSTICS System Status: Green/Red Utility Off: Red UPS Off: Red Low Battery: Red Logic Fault: Red Alarm Contacts: Standard RS 232: Optional UPS Overload: Red Over-Temperature: Red Load on Utility: Red (with XFR SW option)

 

SYSTEM COMPLIANCE

Additional Ruggedization to meet MIL-STD-901, MIL-STD-167, and MIL-STD-810: The UPS System’s construction is extremely robust, and ruggedized throughout. All components and modules within the unit are mounted using additional steel brackets and heavy-duty stainless-steel hardware, which is then further secured using Loctite and RTV where required. All boards are conformal-coated (Acrylic MIL-I-46058 Type R) for maximum resistance to potential condensation and fungus growth. The unit was tested and qualified as follows:

MIL-STD-901C for Grade A, Class II Equipment: Shock test with half sinewave, 20ms duration, 15g peak acceleration shock pulse.

MIL-STD-167-1 for Type I Equipment: Vibration test with range of 4 Hz low frequency to 33 Hz high frequency.

MIL-STD-810D: Operating Temperature Tests including High Temperature Test per Procedure II, Method 501.2, Table 501.2-II Ambient Air, 4 Cycles @ 24 Hours per cycle, Low Temperature Test per Procedure II, Method 505.2, Table 505.2-I Region CO, 4 Cycles @ 24 Hours per cycle, and Temperature Shock Test per Procedure I, Method 503.2, between 0-40 degrees Celsius, 4 Cycles @ 24 Hours per cycle.

Internal EMI Reduction Package to meet MIL-STD-461: The design of this unit is specifically focused on reducing EMI emissions. The UPS contains substantial internal filtering to minimize EMI emissions. Inputs which may be susceptible to transients are protected by several methods, including MOVs. All internal magnetics are shielded with copper and mu-metal to further minimize emissions. The compact rack mount chassis (5.25” High x 19” Wide x 24.125” Deep) is specifically treated with low surface resistivity finishes on the interior. All aluminum parts are treated with clear irridite. The steel parts are treated with zinc plate, followed by a clear chromate. All exterior portions (except for mating surfaces) are then painted with glossy ANSI-61 gray to assure excellent bonding of mating sheet metal parts. All input and output ventilation filters include metal honeycomb-style filters. The unit was tested and qualified as follows:

MIL-STD-461B Part VI for EMI Class A5: CE01, CE03, CS01, CS02, CS06, CS09, RE01, RE02, RS01, RS02, RS03.

Super-Rugged, Long Life Hawker Energy Batteries: Internal Hawker Energy sealed, maintenance free batteries provide 10 minutes back up time at full load. These batteries are extremely resistant to shock, vibration, and wide temperature ranges. Also, they have a very long service life (8-10 years measured at 25 degrees Celsius ambient temperature) for a minimum of maintenance. The batteries are user replaceable.

Structureborne and Airborne Noise: The rugged Navy Galaxy-Series UPS System was tested and qualified to MIL-STD-740B for Grade A Type III Equipment.

Pressure Tests for Submarine Usage: The Navy Galaxy Series UPS System was tested to atmospheric pressure within the range of 750-1250 millibars, and maintained standard operation to specification to the following test pressures for 1 hour:
250 millibars above ambient (applied within 30 seconds and released within 30 seconds)
250 millibars below ambient (applied within 30 seconds and released within 30 seconds)
Ambient pressure of 1000 millibars

Some of the features shown above can be incorporated on our standard UPS models – Nova Electric offers Rugged UPS Systems for Naval Applications in all of our standard rack-mount packages, from 1-6+ KVA. We can also incorporate these additional features on our DC-AC Inverters and Frequency Converters as well. If you have a unique submarine or shipboard application that calls for a rugged AC power source, please don’t hesitate to contact us – we have over 38 years of experience designing and manufacturing America’s best power conversion equipment for harsh environment applications!

For more information concerning Nova Galaxy Series True On-Line UPS
email: moshe@theallpower.com