DC-AC Inverter/Pure Sine Wave Inverter photo
DC-AC Inverter/Pure Sine Wave Inverter
CGL Series

600 W / 700 VA

48 V Pure Sine Wave Inverter

Legacy Series: This series is an older generation suitable for legacy military programs and other specialty applications. Nova Electric still services these models if required, but for new programs and most military / industrial / commercial applications, please see CGP or CGD series for a replacement.  The 120 VAC model is not available anymore and the 220 VAC model has very limited stock.

Nova Electric’s CGL-Series Pure Sine Wave inverters are intended for commercial and industrial applications wherever pure sinewave power is needed at 50 or 60 Hz. These Sine Wave inverters are ideal for running electronic loads such as computers, monitors, printers, telecom systems, radios, fluorescent lamps from batteries, field generators, and solar electro-voltaic panels. They can also drive hand drills, motors and small compressors – please consult the factory for proper sizing. These CGL Pure Sine Wave inverter models can also be optionally ruggedized against shock, vibration, and humidity for military applications including vehicle mounted, shipboard, submarine, aircraft, and ground fixed shelters.

Model Selection

Input 110V Models 50 or 60 Hz 220V Models 50 or 60 Hz
48 CGL600W-48-110 CGL600W-48-220


  • • Microprocessor based design with absolutely accurate and stable frequency.
  • • Compact and light weight, yet rugged and vehicle rated.
  • • Tightly regulated output voltage and frequency
  • • Switch selectable 50 or 60 Hz output, all models
  • • Capable of driving highly reactive loads such as electric tools and appliances.
  • • Capable of driving highly capacitive loads such as switching power supplies.
  • • Very low harmonic distortion, THD<3%.
  • • Suitable for vehicle or wall mounting.
  • • Standard outputs 110V/60Hz, 230V/50Hz.
  • • Switch selectable ±10V output change.
  • • UL / e-13 / CE / FCC Approved


  • • Additional Ruggedization against Shock / Vibration / Humidity to MIL-STD-810
  • • Dustproof / Sandproof Package (Additional removable / washable dust / sand filtration for extra protection in dusty / sandy environments – click here for outline drawing)


  • Input Voltage: 48V Model (42-58VDC)
  • Output Voltage: 110V model 100/110/120 VAC
  • Output Voltage: 220V model 220/230/240 VAC
  • Output Frequency: 50 or 60 HZ User Selectable + 0.05% Accuracy
  • Continuous Power Rating: 600W/700VA
  • Surge Rating: 800W/1000VA
  • Peak Output Current: 10 Amps 110V model / 5 Amps 230V model
  • Efficiency (full load): 110V model 83%
  • Efficiency (full load): 220V model 90%
  • No load Current: 0.7A for 110V Models, 0.35A for 230V Models
  • Output Waveform Sinewave: <4% THD
  • Output Regulation: -10% / +4% All models
  • Protection: Overload, Short Circuit, Reverse Polarity (Fuse), O.T, Over/Under Input Voltage, Fan Failure
  • Safety: UL458 EN60950
  • EMC: FCC Class B, EN50081-1:1992, EN50082-1:1992, EN55022B:1994, EN61000-4-2:1995, EN6100-4-3:1996, ENV50204:1995 e-Mark e13-020866
  • Operating Temperature: -20 to +50°C
  • Storage Temperature: -40°C to + 71°C
  • Size: 10.6″x7.1″x2.8″ (270.0 x180.0 x 72.0mm)
  • Weight: 6.6lb (3kg)

DC-AC Inverter/Pure Sine Wave Inverter Photo

DC-AC Inverter/Pure Sine Wave Inverter

Pure Sine Wave Inverter/DC-AC inverter picture

Pure Sine Wave Inverter/DC-AC Inverter

Typical Dustproof / Sandproof CGL600W Inverter

Specification CGL600W-48-110 CGL600W-48-220
EMI CONDUCTION AND RADIATION Compliance to FCC class A Compliance to En55022 class A
EMS IMMUNITY - Compliance to EN61000-3-2,3
LVD - Compliance to EN60950-1
e-MARK - Compliance to e-13*72/245/EEC, 95/54/EC
Declaration of RoHS 2.0 Conformity
The appearance of U.S. Department of Defense (DoD) visual information does not imply or constitute DoD endorsement.