FEATURED
NESR-1600-Series

NESR Series 1.6 KVA Pure Sinewave Modular Parallelable Inverters

  • Pure Sinewave Output
  • Compact Size
  • Lightweight Design
  • High Reliability
  • Protection: Reverse Polarity / Under Voltage / Over Voltage /Short Circuit / Over Temperature
  • High Efficiency
  • Tight voltage and frequency regulation
Add to Wishlist
Compare

Description

Nova Electric’s NESR-Series is a highly reliable, modular DC-AC inverter system designed with advanced microprocessor technology, offering the following benefits:

  • Paralleling capability supports up to 32 NESR modules (51.2KW)
  • Seamless switching between AC and DC power sources
  • Input and output fully isolated
  • Wide AC Input Range – 75~132V (120V system) and 150~265V (230V system)
  • High efficiency (~95%)
  • Power factor ≧99

Advanced Protection Features

  • Standard Input Protection: Reverse Polarity / Under Voltage / Over Voltage
  • Standard Output Protection: Short Circuit / Over Temperature

Operating Modes

  1. AC Mode (Default): In this Mode, AC utility power is the main source and DC power is the secondary source. PFC>0.99. Max efficiency is 95%. When the AC Utility fails, the inverter seamlessly switches to DC Input source.
  2. Ratio Mode: Simultaneous DC and AC inputs. The percentage of AC and DC loads can be assigned to 100%. (E.g., if AC is set to 70%, then remaining 30% is DC.) Please note that the AC input power must be higher than 300W after assigning the AC and DC ratio.
  3. DC Mode: In this Mode, DC power is the main source and AC utility power is the secondary source. THD is <3%. Max efficiency is 91%. When the DC input source fails, the inverter seamlessly switches to AC Input source.
MODEL NESR-1600-124 NESR-1600-148 NESR-1600-224 NESR-1600-248
AC OUTPUT RATING POWER 1200 W / 1600 VA 1600 W / 1600 VA 1200 W / 1600 VA 1600 W / 1600 VA
SHORT TIME OVERLOAD CAPACITY 105-150% – 15 sec.
NOMINAL VOLTAGE (AC) 120 VAC 230 VAC
OUTPUT VOLTAGE RANGE (AC) 100 – 120 VAC ±3% 200 – 240 VAC ±2%
EFFICIENCY AC MODE (MAX.) 94% 95%
EFFICIENCY DC MODE (MAX.) 89% 90% 90% 91%
FREQUENCY RANGE 50 / 60 Hz
THD (ABOVE 50% RESISTIVE LOAD) < 3%
TURN ON DELAY < 10 sec.
CREST FACTOR AT NOMINAL VALUE DC MODE: 3:1
AC MODE: 6:1		 DC MODE: 3:1
AC MODE: 10:1
AC INPUT NOMINAL VOLTAGE (AC) 120 VAC 230 VAC
VOLTAGE RANGE (AC) 90 ~ 130 VAC ±3% 180 ~ 260 VAC ±2%
POWER FACTOR @ RATING POWER > 0.99
FREQUENCY RANGE 50 / 60 Hz
SYNCHRONIZATION RANGE 47 ~ 53 Hz , 57 ~ 63 Hz
DC INPUT NOMINAL VOLTAGE (DC) 24 VDC 48 VDC 24 VDC 48 VDC
VOLTAGE RANGE (DC) 18 ~ 34 VDC ± 3% 36 ~ 68 VDC ± 3% 18 ~ 34 VDC ± 3% 36 ~ 68 VDC ± 3%
NOMINAL CURRENT (AT 24 VDC / 48 VDC) 56 A 37 A 56 A 37 A
MAXIMUM INPUT CURRENT (15 SEC.) 90 A 60 A 90 A 60 A
SIGNAL
&
CONTROL		 INDICATOR LED LED LED LED
ADVANCED CONTROL RS485 CONTROL INTERFACE (MODBUS)
FAILURE INDICATION BUZZER ALARM
PROTECTION DC INPUT OVER / UNDER VOLTAGE, REVERSE POLARITY
AC INPUT OVER / UNDER VOLTAGE, OVER CURRENT
OUTPUT SHORT CIRCUIT, OVERLOAD, OVER TEMPERATURE
TRANSFER
PERFORMANCE		 INVERTER TO UTILITY AC Seamless
UTILITY AC TO INVERTER Seamless
ENVIRONMENT OPERATING TEMPERATURE -25°C ~ 40°C; REFER TO NESR POWER DERATING CURVE
STORAGE TEMPERATURE -40°C ~ 70°C
RELATIVE HUMIDITY 95%; NON-CONDENSING
VIBRATION BS EN 61373
SAFETY & EMC SAFETY STANDARDS MEETS UL 60950-1 CERTIFIED EN60950-1
EMC STANDARDS CERTIFIED FCC CLASS B Certified EN 55022 Class B; EN 61204-3; EN 55024;
EN 61000-3-2, -3-3, -6-1, -6-3;
IEC 61000-4-2, 3, 4, 5, 6, 8, 11
OTHERS DIMENSION MODULE (W x H x D) 4.13” x 3.27” x 16.14” [ 105 mm x 83 mm x 410 mm ]
DIMENSION RACK (W x H x D) 17.56” x 3.35” x 20.04” [ 446 mm x 85 mm x 509 mm ]
WEIGHT (MODULE/RACK) 8.38 lbs [ 3.8 kg ] / 14.33 lbs [ 6.5 kg ]
MODELNESR-1600-124 NESR-1600-148 NESR-1600-224 NESR-1600-248
AC OUTPUT RATING POWER 1200 W / 1600 VA 1600 W / 1600 VA 1200 W / 1600 VA 1600 W / 1600 VA
SHORT TIME OVERLOAD CAPACITY 105-150% – 15 sec.
NOMINAL VOLTAGE (AC) 120 VAC 230 VAC
OUTPUT VOLTAGE RANGE (AC) 100 – 120 VAC ±3% 200 – 240 VAC ±2%
EFFICIENCY AC MODE (MAX.) 94% 95%
EFFICIENCY DC MODE (MAX.) 89% 90% 90% 91%
FREQUENCY RANGE 50 / 60 Hz
THD (ABOVE 50% RESISTIVE LOAD) < 3%
TURN ON DELAY < 10 sec.
CREST FACTOR AT NOMINAL VALUE DC MODE: 3:1
AC MODE: 6:1 		DC MODE: 3:1
AC MODE: 10:1
AC INPUT NOMINAL VOLTAGE (AC) 120 VAC 230 VAC
VOLTAGE RANGE (AC) 90 ~ 130 VAC ±3% 180 ~ 260 VAC ±2%
POWER FACTOR @ RATING POWER > 0.99
FREQUENCY RANGE 50 / 60 Hz
SYNCHRONIZATION RANGE 47 ~ 53 Hz , 57 ~ 63 Hz
DC INPUT NOMINAL VOLTAGE (DC) 24 VDC48 VDC 24 VDC 48 VDC
VOLTAGE RANGE (DC) 18 ~ 34 VDC ± 3% 36 ~ 68 VDC ± 3% 18 ~ 34 VDC ± 3% 36 ~ 68 VDC ± 3%
NOMINAL CURRENT (AT 24 VDC / 48 VDC) 56 A 37 A 56 A 37 A
MAXIMUM INPUT CURRENT (15 SEC.) 90 A 60 A 90 A 60 A
SIGNAL
&
CONTROL		INDICATORLEDLEDLEDLED
ADVANCED CONTROL RS485 CONTROL INTERFACE (MODBUS)
FAILURE INDICATION BUZZER ALARM
PROTECTIONDC INPUT OVER / UNDER VOLTAGE, REVERSE POLARITY
AC INPUT OVER / UNDER VOLTAGE, OVER CURRENT
OUTPUTSHORT CIRCUIT, OVERLOAD, OVER TEMPERATURE
TRANSFER
PERFORMANCE 		INVERTER TO UTILITY AC Seamless
UTILITY AC TO INVERTER Seamless
ENVIRONMENTOPERATING TEMPERATURE -25°C ~ 40°C; REFER TO NESR POWER DERATING CURVE
STORAGE TEMPERATURE -40°C ~ 70°C
RELATIVE HUMIDITY 95%; NON-CONDENSING
VIBRATIONBS EN 61373
SAFETY & EMC SAFETY STANDARDS MEETS UL 60950-1 CERTIFIED EN60950-1
EMC STANDARDS CERTIFIED FCC CLASS B Certified EN 55022 Class B; EN 61204-3; EN 55024;
EN 61000-3-2, -3-3, -6-1, -6-3;
IEC 61000-4-2, 3, 4, 5, 6, 8, 11
OTHERSDIMENSION MODULE (W x H x D) 4.13” x 3.27” x 16.14” [ 105 mm x 83 mm x 410 mm ]
DIMENSION RACK (W x H x D) 17.56” x 3.35” x 20.04” [ 446 mm x 85 mm x 509 mm ]
WEIGHT (MODULE/RACK) 8.38 lbs [ 3.8 kg ] / 14.33 lbs [ 6.5 kg ]
MODEL NESR-1600-124 NESR-1600-148 NESR-1600-224 NESR-1600-248
AC OUTPUT RATING POWER 1200 W / 1600 VA 1600 W / 1600 VA 1200 W / 1600 VA 1600 W / 1600 VA
SHORT TIME OVERLOAD CAPACITY 105-150% – 15 sec.
NOMINAL VOLTAGE (AC) 120 VAC 230 VAC
OUTPUT VOLTAGE RANGE (AC) 100 – 120 VAC ±3% 200 – 240 VAC ±2%
EFFICIENCY AC MODE (MAX.) 94% 95%
EFFICIENCY DC MODE (MAX.) 89% 90% 90% 91%
FREQUENCY RANGE 50 / 60 Hz
THD (ABOVE 80% RESISTIVE LOAD) < 3%
TURN ON DELAY < 10 sec.
CREST FACTOR AT NOMINAL VALUE DC MODE: 3:1
AC MODE: 6:1		 DC MODE: 3:1
AC MODE: 10:1
AC INPUT NOMINAL VOLTAGE (AC) 120 VAC 230 VAC
VOLTAGE RANGE (AC) 90 ~ 130 VAC ±3% 180 ~ 260 VAC ±2%
POWER FACTOR @ RATING POWER > 0.99
FREQUENCY RANGE 50 / 60 Hz
SYNCHRONIZATION RANGE 47 ~ 53 Hz , 57 ~ 63 Hz
DC INPUT NOMINAL VOLTAGE (DC) 24 VDC 48 VDC 24 VDC 48 VDC
VOLTAGE RANGE (DC) 18 ~ 34 VDC ± 3% 36 ~ 68 VDC ± 3% 18 ~ 34 VDC ± 3% 36 ~ 68 VDC ± 3%
NOMINAL CURRENT (AT 24 VDC / 48 VDC) 56 A 37 A 56 A 37 A
MAXIMUM INPUT CURRENT (15 SEC.) 90 A 60 A 90 A 60 A
SIGNAL
&
CONTROL		 INDICATOR LED LED LED LED
ADVANCED CONTROL RS485 CONTROL INTERFACE (MODBUS)
FAILURE INDICATION BUZZER ALARM
PROTECTION DC INPUT OVER / UNDER VOLTAGE, REVERSE POLARITY
AC INPUT OVER / UNDER VOLTAGE, OVER CURRENT
OUTPUT SHORT CIRCUIT, OVERLOAD, OVER TEMPERATURE
TRANSFER
PERFORMANCE		 INVERTER TO UTILITY AC Seamless
UTILITY AC TO INVERTER Seamless
ENVIRONMENT OPERATING TEMPERATURE -25°C ~ 40°C; REFER TO NESR POWER DERATING CURVE
STORAGE TEMPERATURE -40°C ~ 70°C
RELATIVE HUMIDITY 95%; NON-CONDENSING
VIBRATION BS EN 61373
SAFETY & EMC SAFETY STANDARDS MEETS UL 60950-1 CERTIFIED EN60950-1
EMC STANDARDS CERTIFIED FCC CLASS B Certified EN 55022 Class B; EN 61204-3;
EN 55024;
EN 61000-3-2, -3-3, -6-1, -6-3; IEC 61000-4-2, 3, 4, 5, 6, 8, 11
OTHERS DIMENSION MODULE (W x H x D) 4.13” x 3.27” x 16.14” [ 105 mm x 83 mm x 410 mm ]
DIMENSION RACK (W x H x D) 17.56” x 3.35” x 20.04” [ 446 mm x 85 mm x 509 mm ]
WEIGHT (MODULE/RACK) 8.38 lbs [ 3.8 kg ] / 14.33 lbs [ 6.5 kg ]

OPTIONS

  • Ruggedization against high shock, vibration and humidity

NESR Series 1.6 KVA Pure Sinewave Telecom Inverters PDF Data Sheet

DOWNLOAD

NESR Series 1.6 KVA Pure Sinewave Telecom Inverters PDF User Manual

DOWNLOAD