RCGP3K Series – 24 and 48 VDC 3 KW Rack Mount Pure Sine Wave Inverters

Description

The RCGP-Series Pure Sinewave DC-AC Inverters are intended for commercial, industrial or military applications wherever standard utility-like power is required at 50 or 60 Hz. These units are ideal for running electronic loads such as computers, monitors, printers, telecom systems, radios, fluorescent lamps from batteries, field generators, and solar electro-voltaic panels. They can also drive hand drills, motors and small compressors when sized correctly for the inrush current. Variations of this Series have been formally qualified to MIL-STD-810 for Shock, Vibration, Humidity, Low Temperature, High Temperature, Temperature Shock, Low Pressure, and Sand and Dust, in addition to MIL-STD-461 for EMI.

Utilizing field proven technology, this family of rugged pure sinewave DC-AC Inverters is suitable for harsh environments applications including:

• Military Applications: Including HMMWV, UAV, Shipboard, Submarine, Aircraft, Mobile Power Units, Shelters, Transportable Systems, Tactical Systems, Ground Support, and more
• Heavy-Duty Industrial Applications
• Demanding Commercial Applications
• Communications Systems
• Utility Applications

• MIL-STD-810 Compliance
• MIL STD-461 Compliance

SPECIFICATIONS

• Input Voltage: 24 or 48 VDC Nominal
• Output Voltage 110V model: 100/110/120 VAC (User Selectable)
• Output Voltage 220V model: 220/230/240 VAC (User Selectable)
• Output Frequency: 50 or 60 HZ (User Selectable with +/- 0.5% Accuracy)
• Continuous Power Rating: 3000 W / 3000 VA
• Surge Rating: <6000 VA / 1 second
• Efficiency 120V model (full load): 90%-92%
• Efficiency 220V model (full load): 90%-94%
• Output Waveform Sinewave 120V: <5%*
• Output Waveform Sinewave 220V: <3%**
• Output Regulation: ±5% (120V), ±3% (220V)
• Protection: Overload • Short Circuit • Reverse Polarity (Fuse), Overtemp, Over/Under Input Voltage.
• Operating Temperature: -20° to +60°C With Derating 2.5% / Degree, above 40°C
• Storage Temperature: -40°C to + 71°C
• MTBF: Over 100,000 hours per field data
• MTTR: 30 minutes
• Shock: 20g / 11mS per MIL-STD-810
• Vibration: per MIL-STD-810
• Humidity: per MIL-STD-810 to 95% non condensing
• EMI: per MIL-STD-461 CE102, CS101, CS114, CS115, CS116, RE102, and RS103
• Size: 3.50 “H x 19″W x 16.5″L
• Weight: 25 lb

* Normal Condition: VDC in = 12.5/25/50 — VAC out = 100/110/115/120 @ 80% Full Load (PF = 1.0)

** Normal Condition: VDC in = 12.5/25/50 — VAC out = 200/220/230/240 @ 80% Full Load (PF = 1.0)

OPTIONS

• Ruggedization against high shock, vibration and humidity
• MS connector mates
• Chassis Slide Guides
• Electromechanical transfer switch
• High IP Protection for front / rear panels (typically IP32,) including louvers on all intake and exhaust, as well as fully gasketed breakers, switches, and indicators.
• Rugged Transit Cases and Custom Enclosures
• Environmental Stress Screening Services

This series of units is currently used on military vehicles, military shelter applications, shipboard applications, and other harsh environment applications worldwide.  Variations of this design have been formally qualified for the MIL-STDs shown below.  Actual testing is required to confirm each unit’s configuration compliance with these specifications:

MIL-STD-461E: CE102, CS101, CS114, CS115, CS116, RE102, and RS103

MIL-STD-810F: Environmental Engineering Considerations and Laboratory Tests

• Low Pressure (Altitude) – Method 500.4, Procedure I (Storage/Air Transport) and Procedure II (Operation/Air Carriage)
• High Temperature Method 501.4, Procedure I (Storage) and Procedure II (Operation)
• Low Temperature Method 502.4, Procedure I (Storage) and Procedure II (Operation)
• Temperature Shock Method 503.4, Procedure II (Cyclic)
• Shock Method 516.5, Procedure VI (Bench Handling)
• Vibration Method 514.5, Procedure I (General Vibration)
• Humidity Method 507.4
• Sand and Dust Method 510.4, Procedure I (Blowing Dust)