GL Series 72 VDC Nominal 2-10 KVA Pure Sine Wave DC-AC Inverters
- Pure Sinewave Output
- Small Size
- Lightweight, extremely compact
- High reliability, MTBF exceeds 100,000 hours
- OV, O.L. and O.T. protected
- MTTR below 30 minutes; modular design
- Withstands high reactive load
- Output fault alarm (relay closure)
- Boards are conformal coated
- Description
- Models
- Specifications
Description
Utilizing high frequency PWM topology, these models offer volume and weight advantages suitable for severe environment and high reliability applications such as:
- Military programs, vehicular, shipboard
- AC Power from vehicle battery
- Communications
- Shelters
- Transit Applications
62-84 VDC Operating Input / 2 KVA – 10+ KVA
(Consult factory for higher power ratings)
Standard Model Selection
60 Hz Models
50 Hz Models400 Hz Models
3 Phase Models
ELECTRICAL
- Input Voltage: 62-84 VDC (Extended range available)
- Output Voltage: See Table
- Frequency: 50 Hz, 60 Hz, 400 Hz (+/-0.5%)
- Frequency Regulation: +/-0.5% N.L. to F.L.
- Voltage Regulation: +/-1.5% N.L. to F.L.
- Efficiency: Approximately 80% (depending on model)
- Reactive Load: 0.75 Lead to 0.75 Lag
- Distortion: 5% THD, 3% Single Harmonic
- Overload: 125% for 5 minutes
- Overload Protection Range: Automatic overload & short circuit protection
- Sync & Phase Lock Range: +/-3 Hz, Typical (50/60 Hz models)
- Transient Response: Approx. 1/4 cycle recovery to 95% of nominal
ENVIRONMENTAL & MECHANICAL
- Operating Temp: -20°C to +50°C Standard -40°C to +71°C Optional
- Cooling: By internal DC brushless fan
- Vibration: Normal shipping and handling
- Shock: 20g, 11 mS half sinewave
- Humidity: To 95% RH non-condensing
- EMI: Designed to meet FCC Part 15, Class A, Can meet MIL-STD-461 with additional filtering